บริษัท เมคคาทรอนิกส์ แมชชีน ทูลส์ : Push/Pull Cylinders

Product Detail :

Metric Push/Pull Cylinders

Special wipers keep chips and contaminants out .
Chromed and hardened alloy steel plungers run longer with less wear and drag than other brands.
Vent port with bronze filter gives the cylinder a place to breathe" and helps keep chips from drawing past wipers . (Can be used for a breather line or used as a Double Acting Unclamp port.)
BHC™ (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching, especially in the event of high side or "kick" loads which promote excessive scoring in other brands.
Proprietary seal designs reduce leakage and increase seal life for longer lasting, more dependable cylinders.

Metric Push/Pull Cylinders, Threaded Body

Specifications

Model No.	Cylinder Capacity (kN)**		Vertical Clamping Stroke (mm)	Body Thread	Effective Piston Area (cm²)		Oil Capacity (cm³)****
Specifications
Model No.	Extend	Retract	Vertical Clamping Stroke (mm)	Body Thread	Extend	Retract	Extend	Retract
Single Acting (S/A) Cylinders, actuated hydraulically and spring returned.
42-5010-51	N/A	2,1	14,5	M28 x 1,5	N/A	0,63	N/A	0,92
42-5010-91	N/A	6,2	20	M38 x 1,5	N/A	1,90	N/A	3,82
42-5011-31	N/A	13,7	29,5	M48 x 1,5	N/A	4,04	N/A	11,9
42-5018-00	N/A	24,9	42	M65 x 1,5	N/A	7,60	N/A	32
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
42-5020-51	5,3	2,1	14,5	M28 x 1,5	1,61	0,63	2,3	0,92
42-5020-91	13,3	6,2	20	M38 x 1,5	3,88	1,90	7,8	3,82
42-5021-31	27,1	13,7	29,5	M48 x 1,5	7,92	4,04	23	11,9
42-5028-00	53,3	24,9	42	M65 x 1,5	15,52	7,60	65,4	32

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output forcecan be adjusted by varying the hydraulic system pressure. to calculate the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to frictional loss, seal and wiper drag, and/or return spring forces.

Metric Block Pull Cylinders

Specifications

Model No.	Cylinder Capacity (kN)**	Stroke (mm)	Body Size (mm)	Piston Area (cm²)	Oil Capacity (cm³)
Specifications
Model No.	Retract	Stroke (mm)	Body Size (mm)	Retract	Retract
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
42-5111-01	5,9	25,5	44,5 x 51	1,7	4,4
42-5111-02	5,9	51	44,5 x 51	1,7	8,8
42-5111-51	17,5	25,5	51 x 63,5	5,0	12,7
42-5111-52	17,5	51	51 x 63,5	5,0	25,4

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force can be adjusted by varying the hydraulic system pressure. To calculate the approximate output force for your application, multiply the piston area by the system operating pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return spring forces.