E-Catalog > VEKTEK USA > Cylinders

Metric Cylinder Standard Features

Adjustable force ranging from "minimal" to maximum cylinder capacity, by adjusting the input pressure Designed for long life in high production applications. Don't gamble with "cheap" cylinders which wear out prematurely

BHC™ (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching. After years of use, cylinder removal is easier because BHC™'s corrosion resistance is better than black oxide or chrome plating.

Proprietary seal designs reduce leakage and increase seal life for longer lasting, more dependable cylinders.

Threaded models use positionable, G Series fluid ports.

Cartridge models are supplied with an appropriate gasket to seal against the cavity bottom.

Chromed and hardened alloy steel pistons won't "mushroom" even when used without grippers.

Special wipers keep chips and contaminants out.

Positive piston stop shoulder keeps the spring from "bottoming out" guarding against premature spring failure which can plague other cylinder brands.

NOTE: For maximum spring life, single acting cylinders should not be run to the end of stroke regularly.

Metric Threaded Mini-Cylinders

Specifications

Specifications Model No. Cylinder  Capacity (kN)** Stroke  (mm) Body  Thread Minimum  Length  (mm) Piston  Area  (cm2) Oil  Capacity  (cm3) Extend Extend Extend Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned. 42-0010-01 4,4 9,5 M20 x 1,5 51 1,3 1,2 42-0010-10 19  66,5   2,5  42-0010-11 32   83  4,1 42-0010-02 10,1 6,5 M28 x 1,5 56 2,9 1,8 42-0010-12  19  69 5,5  42-0010-13  32  86 9,2

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.

All dimensions are in mm.

Metric Threaded Cylinders

Specifations

Specifications Model No. Cylinder  Capacity  (kN)** Stroke  (mm) Body  Thread Minimum  Length  (mm) Piston Area  (cm2) Oil Capacity  (cm3) Extend Retract Extend Retract Extend Retract Single Acting (S/A) Cylinders, actuated hydraulically and spring returned. 42-0010-03 17,8 N/A 12,5 M35 x 1,5 68 5,1 N/A 6,5 N/A 42-0010-04 25,5 80,5 13,0 42-0010-05 51 109 26,0 42-0010-06 39,9 N/A 12,5 M48 x 1,5 70 11,4 N/A 14,5 N/A 42-0010-07 25,5 82,5 29,0 Double Acting (D/A) Cylinders, actuated hydraulically both directions. 42-0020-00 17,8 5,9 25,5 M48 x 1,5 80,5 5,1 1,7 13,0 4,4 42-0020-01 51 109 26,0 8,8 42-0020-02 39,9 17,5 25,5 M65 x 1,5 82,5 11,4 5,0 29,0 12,7 42-0020-03 51 111,5 58,0 25,5

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.

All dimensions are in mm.

Metric Block Cylinders

Specifications

Specifications Model No. Cylinder  Capacity (kN)** Stroke  (mm) Body  Size (mm) Minimum  Length  (mm) Piston  Area  (cm2) Oil Capacity (cm3) Extend Retract Extend Retract Extend Retract Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned. 42-0110-00 10,1 N/A 6,5 28,5 x 51 60 2,9 N/A 1,9 N/A 42-0110-01 19 79 5,7 42-0110-02 17,8 N/A 12,5 44,5 x 51 71 5,1 N/A 6,5 N/A 42-0110-03 42-0110-12 25,5 38 84 100 13,0 19,3 42-0110-04 51 112,5 26,0 42-0110-05 39,9 N/A 12,5 51 x 63,5 73 11,4 N/A 14,5 N/A 42-0110-06 42-0110-13 42-0110-14 25,5 38 51 86 98,5 114,5 29,0 43,4 58,0 Acting (D/A) Cylinders, actuated hydraulically both directions. 42-0120-00 10,1 5,6 6,5 28,5 x  51 60 2,9 1,6 1,9 1,0 42-0120-01 19 79 5,7 3,0 42-0120-02 17,8 5,9 12,5 44,4 x 51 71 5,1 1,7 6,5 2,2 42-0120-03 42-0120-08 25,5 38 84 100 13,0 19,3 4,4 6,6 42-0120-04 51 112,5 26,0 8,8 42-0120-05 39,9 17,5 12,5 51 x 63,5 73 11,4 5,0 14,5 6,3 42-0120-06 42-0120-09 25,5 38 86 98,5 29,0 43,4 12,7 19,0 42-0120-07 51 114,5 58,0 25,4

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.

Metric Block Cylinders

Specifications

Specifications Model No. Cylinder  Capacity (kN)** Stroke  (mm) Body  Size (mm) Minimum  Length  (mm) Piston  Area  (cm2) Oil Capacity (cm3) Extend Retract Extend Retract Extend Retract Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned. 42-0110-00 10,1 N/A 6,5 28,5 x 51 60 2,9 N/A 1,9 N/A 42-0110-01 19 79 5,7 42-0110-02 17,8 N/A 12,5 44,5 x 51 71 5,1 N/A 6,5 N/A 42-0110-03 42-0110-12 25,5 38 84 100 13,0 19,3 42-0110-04 51 112,5 26,0 42-0110-05 39,9 N/A 12,5 51 x 63,5 73 11,4 N/A 14,5 N/A 42-0110-06 42-0110-13 42-0110-14 25,5 38 51 86 98,5 114,5 29,0 43,4 58,0 Acting (D/A) Cylinders, actuated hydraulically both directions. 42-0120-00 10,1 5,6 6,5 28,5 x  51 60 2,9 1,6 1,9 1,0 42-0120-01 19 79 5,7 3,0 42-0120-02 17,8 5,9 12,5 44,4 x 51 71 5,1 1,7 6,5 2,2 42-0120-03 42-0120-08 25,5 38 84 100 13,0 19,3 4,4 6,6 42-0120-04 51 112,5 26,0 8,8 42-0120-05 39,9 17,5 12,5 51 x 63,5 73 11,4 5,0 14,5 6,3 42-0120-06 42-0120-09 25,5 38 86 98,5 29,0 43,4 12,7 19,0 42-0120-07 51 114,5 58,0 25,4

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.

Metric Combination Block Cylinders

Specifications

Specifications Model No. Cylinder  Capacity (kN)** Stroke  (mm) Body  Size (mm) Minimum  Length  (mm) Piston  Area  (cm2) Oil Capacity (cm3) Extend Retract Extend Retract Extend Retract Double Acting (D/A) Cylinders, actuated hydraulically both directions. 42-1121-00 10 5,5 16 35  x  60 68 2,9 1,6 4,6 2,5 42-1121-01 50 102 14,3 7,9 42-1121-02 17,7 10,8 20 45  x  65 71 5,1 3,1 10,1 6,2 42-1121-03 50 101 25,3 15,4 42-1121-04 27,7 17,7 25 55  x  75 85 7,9 5,1 19,8 12,7 42-1121-05 50 110 39,6 25,3 42-1121-06 46,8 29 25 63  x  85 89 13,4 8,3 33,5 20,8 42-1121-07 50 114 66,9 41,6 42-1121-08 70,9 43,2 25 75  x 100 100 20,3 12,4 50,7 30,9 42-1121-09 50 125 101,3 61,8

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.

Metric Hollow Rod Cylinders

Specifications

Specifications Model No. Cylinder Capacity  (kN)** Stroke  (mm) Body  Size Minimum Height (mm) Piston Area (cm2) Oil  Capacity  (cm3) Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned. 42-0210-00 20,6 6,5 41,5 x 55 51 5,9 3,8 42-0210-01 29,7 9,5 49,5 x 62 63 8,5 8,1 42-0210-02 53,2 12,5 64,5 x 76 75,5 15,2 19,3 Double Acting (D/A) Cylinders, actuated hydraulically in both directions. 42-0220-00 20,6 6,5 41,5 x 55 51 5,9 3,8 42-0220-01 29,7 9,5 49,5 x 62 63 8,5 8,1 42-0220-02 53,2 12,5 64,5 x 76 75,5 15,2 19,3

** Cylinder capacities are listed at 350 bar (35MPa) maximum operating pressure. The output force is can be adjusted by varying hydraulic system pressure. To calculate the  approximate output force for an application, multiply the Piston Area by the system operating pressure. Actual force may vary slightly due to frictional losses, seal and wiper drag,  and/or return spring forces.

Metric Cartridge Mount Mini-Cylinders

Specifications

Specifications Model No. Cylinder Capacity (kN)** Stroke (mm) Body Thread Minimum Length (mm) Piston Area (cm2) Oil Capacity (cm3) Single Acting (S/A) Cylinders, actuated hydraulically and spring returned. 42-1010-00 2,4 5.2 M16 x 1,5 28 0,7 0,3 42-1010-01 4,4 7 M20 x 1,5 38 1,3 0,8 42-1010-02 10,1 9,5 M28 x 1,5 35 2,9 2,7 42-1010-03 19 62 5,5 42-1010-04 17,5 8 M35 x 1,5 37,5 5,1 4,0

** Cylinder capacities are listed at 350 bar (35MPa) maximum operating pressure. The output force is can be adjusted by varying hydraulic system pressure. To calculate the  approximate output force for an application, multiply the Piston Area by the system operating pressure. Actual force may vary slightly due to frictional losses, seal and wiper drag,  and/or return spring forces.

Easy Mount Cartridge Specifications

		Specifications Model No. Cylinder Capacity (kN)** Stroke (in.) Effective  Piston Area (cm2) Oil Capacity  (cm3) Extend Retract Extend Retract Extend Retract Double Acting (D/A) Cylinders, actuated hydraulically both directions. 42-1621-32 27 14 15 7,9 4,1 11,9 6,1

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the piston area by the operating pressure. (Actual force my vary slightly due to friction loss, seal and wiper drag, and/or return springs.)

42-0010-02
42-0010-10
42-0010-11
42-0010-01
42-0010-12
42-0010-13

42-0010-03
42-0010-06
42-0010-04
42-0010-05
42-0010-07
42-0020-00
42-0020-01
42-0020-02
42-0020-03

42-0110-01
42-0110-02
42-0110-00
42-0110-03
42-0110-04
42-0110-05
42-0110-06
42-0120-00
42-0120-01
42-0120-02
42-0120-03
42-0120-04
42-0120-05
42-0120-06
42-0120-07
42-0110-12
42-0110-13
42-0110-14
42-0120-08
42-0120-09

42-1110-00
42-1110-01
42-1110-02
42-1110-03
42-1110-04
42-1110-05
42-1110-08
42-1110-06
42-1110-09
42-1110-07
42-1120-00
42-1120-01
42-1120-02
42-1120-03
42-1120-08
42-1120-04
42-1120-05
42-1120-06
42-1120-09
42-1120-07

42-1121-02
42-1121-03
42-1121-04
42-1121-05
42-1121-06
42-1121-07
42-1121-09
42-1121-00
42-1121-01
42-1121-08

42-0210-00
42-0210-01
42-0210-02
42-0220-00
42-0220-02
42-0220-01

42-1010-00
42-1010-01
42-1010-02
42-1010-03
42-1010-04

42-1621-32