E-Catalog > VEKTEK USA > Work Supports

Metric Work Supports Standard Features

Standard G 1/4 and G 1/8 porting is located in the base of the support for easy access to both the clamp and vent ports (bronze filter installed before shipping).

VektorFlo^® Metric work supports last longer and stand up to harsh environments and abuse better than other models.

Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports.

Special corrosion resistant plungers and sleeves reduce the tendency to stick.

BHC™ coating on the work support bodies helps prevent corrosion.

Special large diameter plungers and sleeves provide greater rigidity.

Metric Spring Advance Work Supports

Specifications

Specifications Model No. Support Capacity (kN)* Mounting  Style Contact  Force (N) Stroke (mm) Base  Dimensions (mm) Extended  Height (mm) Oil  Capacity (cm3) Spring Advance Work Supports, spring lifts plunger,  part weight depresses plunger, hydraulic pressure locks in place. 41-0050-07 4,4 Base 4,5 - 9 6,5 24 x 33,5 x 44,5 56 0,16 41-0051-07 Cartridge N/A 47,5 0,16 41-0050-06 11 Base 9 - 26,5 9,5 25 x 41,5 x 59 70,5 0,33 41-0051-06 Cartridge N/A 62 0,33 41-0050-04 33,4 Base 40 - 80 12,5 25 x 63,5 x 76 111 1,64 41-0050-05 55,6 Base 49 - 71 19 31,5 x 89 x 97 133 4,26

* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.

NOTE: Minimum fluid pressure is 52 bar (5,2 MPa)

NOTE: DIN ISO 2768 T1 and T2 not applicable

  For minimum operating pressures and resulting capacities, see Capacity Charts.

etric Air Advance Work Supports

Specifications

Specifications Model No. Support  Capacity (kN)* Mounting  Style*** Hydraulic  Connection Contact  Force  (N)** Stroke (mm) Base  Dimensions (mm) Retracted  Height (mm) Oil  Capacity (cm3) Air Advance Work Supports, air pressure lifts plunger against part;  hydraulic pressure locks in place, spring retracts plunger. 41-0060-07 4,4 Base G 1/8 Port 17,5 6,5 24 x 33,5 x 44,5 49,5 0,16 41-0061-07 Cartridge Thru Cavity N/A 41 41-0060-06 11 Base G 1/8 Port 35,5 9,5 25 x 41,5 x 59 61 0,33 41-0061-06 Cartridge Thru Cavity N/A 52,5 41-0060-04 33,4 Base G 1/8 Port 89 12,5 25 x 63,5 x 76 98 1,64 41-0060-05 55,6 Base G 1/8 Port 253,5 19 31,5 x 89 x 97 114 4,26

* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.

** Contact force at 1,7 bar (.17 MPa) maximum. To lower the contact force, install an air filter regulator of appropriate size. 

*** For cartridge mounted models, see the Cavity Dimensions tab

NOTE: Minimum fluid pressure is 36 bar (3,6 MPa)

DIN ISO 2768 T1 and T2 not applicable

Metric Fluid Advance Work Supports

Specifications

7.3 kn Capacity Cartridge

Specifications Model No. Support  Capacity (kN)* Hydraulic  Connection Contact  Force  (N)** Stroke (mm) Base  Dimensions (mm) Retracted  Height (mm) Oil  Capacity (cm3) Fluid Advance Work Supports, hydraulic pushes a spring which lifts the plunger;   hydraulic pressure locks in place. 41-0070-04 41-0070-14 4.4 G 1/8 Port 4.4 - 26.7 6,5 12.5 6.5 12.5 23 x 33.5 x 44.5 62.5 75 2.6 2.8 1.3 1.5 41-0071-04 41-0071-14 Cartridge N/A 53.5 66.5 41-0171-12 7.3** Cartridge 4.4-26.7 12.5 N/A 67 1.5 41-0070-03 41-0071-13 11 G 1/8 Port 13.5 - 44.5 6.5 12.5 6.5 12.5 31.5 x 41.5 x 58.5 82.5 95.5 3.1 3.4 2 2.3 41-0071-03 41-0071-13 Cartridge N/A 72 84.5 41-0070-05 41-0071-05 17 G 1/8 Port 26.5 - 53.5 12,5 25 x 73 x 81 N/A 82.5 72.5 10.7 9.7

* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.

* Interchangeable with many competitive products.

Note:

1. Restrict the flow rate to a maximum of 2.13 l/min
2. Minimum fluid pressure 52 bar (5.2 MPa)
3. DIN ISO 2768 T1 and T2 not applicable
4. The maximum system back-pressure a fluid advance work support can overcome is 0.7 bar(0.007 MPa). Return back-pressure greater the  0.7 bar (0.07MPa) may cause slow or failed retraction.

41-0051-00
41-0051-01
41-0050-04
41-0050-05
41-0050-07
41-0051-07
41-0050-06
41-0051-06

41-0061-00
41-0061-01
41-0060-04
41-0060-05
41-0060-07
41-0061-07
41-0060-06
41-0061-06

39-0020-09
40-9872-40
40-9872-43
40-9872-47
41-0071-03
41-0071-04
41-0070-03
41-0070-04
41-0071-05
41-0070-05
39-0510-59
41-0071-13
41-0070-13
41-0070-14
41-0071-14
41-0708-01
41-0707-01
41-0715-01
41-0171-12