Sign In
E-Catalog > miniBOOSTER > The HC6D2W miniBOOSTER
Product Detail :
The HC6D2W miniBOOSTER
HC6D2W versions: 9 different intensification factors
PIN: 20 – 200 bar (inlet pressure)
PH: 800 bar maximum (outlet pressure)
PRETURN: As low as possible (Return pressure to tank)
Intensification ratios: PH = (PIN – PReturn) i (Intensification)
The intensification ratio is related to the inlet pressure at media 2, the values in the table are measured at 1 bar on media 2
Drain connections: Max. 10 bar
Mounting: Inline tube
A model = no dump valve
Description
The HC6D2W is a self priming dual media unit which is capable of up to 28 l/min flow on the high pressure end. Like other miniBOOSTER models, the HC6D2W raises supplied pressure to a higher outlet pressure and automatically compensates for consumption of oil to maintain the high pressure.
Adjustment of the outlet pressure is carried out by varying the supplied pressure. Relative to its flow capability, the HC6D2W is a compact unit weighing 24 kg.
Flow Rates
|
Intensification factor |
Max. outlet flow |
Max. inlet flow |
|---|---|---|
|
1.0 |
28.1 |
30 |
|
1.2 |
24.5 |
30 |
|
1.5 |
21.9 |
35 |
|
2.0 |
17.0 |
35 |
|
3.0 |
13.1 |
40 |
|
3.9 |
8.7 |
40 |
|
5.2 |
8.4 |
45 |
|
7.1 |
6.2 |
45 |
|
10.1 |
4.4 |
45 |
Dimensions
- 6D2-120 / Issue 03
Functions
The basic operation is illustrated in the function diagram. Media 1 is fed through the IN port flowing freely through the bistable valve BV1 driving the LP pistons. From the suction inlet IN Media 2 is drawn through the check valves 2 x KV1, and pumped through the 2 x KV2 to the high-pressure side H. In this condition maximum flow trough the booster is achieved giving a fast forward function.
The unit will automatically stall when end pressure on high-pressure side H is reached. If there is a pressure drop on the high pressure side due to consumption or leakage, the HP1 and HP2 units will automatically operate to maintain the end pressure.
Function Diagram
- 0-122 Model / Issue 02
Connection types
|
Connection |
IN / R |
H1, S1, H2 & S2 |
D1 &D2 |
|---|---|---|---|
|
1 |
1/2" BSP |
1/2" BSP |
1/8" BSP |
Max. tightening torque BSP
|
IN / R |
H | |
|---|---|---|
|
1/2" BSP |
1/2" BSP |
|
|
with steel washer |
13.0 da/Nm |
13.0 da/Nm |
|
with aluminium washer |
7.0 da/Nm |
– |
|
with cutting edge |
13.0 da/Nm |
13.0 da/Nm |
Fluids
Media 1: Recognized hydraulic fluids, glycol solutions (Min > 5%)
Media 2: Hydraulic fluids, glycol
Please note! For other media, such as methanol,
please contact miniBOOSTER
Materials
- Body & internal components: Stainless steel 316 W.1.4404
- Dynamic seals, H-pur (other seal systems available)
Ordering a HC6D2W
Ordering example of a HC6D2W with i = 3.9, with BSP connections: HC6D2W - 3.9 - A - 1HH
|
Model |
Intensification, i |
Dump Valve |
Connections |
|||
|
HC6D2W |
your selection... |
your selection... |
your selection... |
|||
|
see flow rate table |
A = (no) / A model |
1 |
||||
