E-Catalog > Hexagon (Hex) Go/NoGo Gages > Hexagon (Hex) Go/NoGo Gages

Hexagon (Hex) Go/NoGo Gages

Hexagon Broach Gages can be used with Polygon’s standard ASME broaches to make sure that the size of the hexagon hole has been machined properly. Unlike rotary broaches, hex broach Gages have no taper. Our Hexagon Gages are held to tight tolerances and can be made to custom shapes and sizes. We also offer external hexagon go / nogo gages.

Polygon’s hex broach Gages are made as GO and NOGO pairs. Each gage is designed to be held by hand and inserted into the hexagon hole. If the NOGO Gage fits, then the hole is too large and the part fails inspection. If the GO Gage fits, then the hole is the right size and the part will pass inspection. If the hole was too small the GO Gage would not have fit inside.

Hex Gages can also help to determine if there is too much twist in the form, a common troubleshooting feature of holes manufactured using the rotary broaching process. Our Hexagon Broach Gages are made of durable hardened M-2 tool steel. All Gages come with handles featuring green caps on the GO Gage side and red caps on the NOGO side.

Square Go/NoGo Gages

Square Broach gages (or gauges) can be used to make sure that the size of the square hole has been machined properly. Unlike rotary broaches, square broach gages have no taper. Our square gages are held to tight tolerances and can be made to custom shapes and sizes.

Polygon’s square broach gages are made as GO and NOGO pairs. Each gauge is designed to be held by hand and inserted into the square hole. If the NOGO gage fits, then the hole is too large and the part fails inspection. If the GO gage fits, then the hole is the right size and the part will pass inspection. If the hole was too small the GO gage would not have fit inside.

Square Gages can also help to determine if there is too much twist in the form, a common troubleshooting feature of holes manufactured using the rotary broaching process. Our Square Broach gages are made of durable hardened M-2 tool steel. All gages come with handles featuring green caps on the GO gage side and red caps on the NOGO side. Gage Tolerances are +0/-.0002.

Hexalobular Go/NoGo Gages

Hexalobular Broach gages can be used to make sure that the size of the 6-lobed (hexalobular) hole has been machined properly. Unlike rotary broaches, hexalobular broach gages have no taper. Our gages are held to tight tolerances and can be made to custom shapes and sizes. We also offer internal and external hexalobular Go / NoGo Gages.

Polygon’s broach gages are made as GO and NOGO pairs. Each gage is designed to be held by hand and inserted into the hexalobular (6-lobed) hole. If the NOGO gage fits, then the hole is too large and the part fails inspection. If the GO gage fits, then the hole is the right size and the part will pass inspection. If the hole was too small the GO gage would not have fit inside.

Hexalobular Gages can also help to determine if there is too much twist in the form, a common troubleshooting feature of holes manufactured using the rotary broaching process. Our Hexalobular Broach gages are made of durable hardened M-2 tool steel. All gages come with handles featuring green caps on the GO gage side and red caps on the NOGO side.

Major and Minor Diameters Per ISO 10664 and Include Long Form Certification of Calibration.

Rosan AS1300 (PS10035) Go/NoGo Gages

Polygon Solutions offer a wide range of Rosan Gages to check serrations per SAE Standard AS1300 Ports (PS10035).

 All Dimensions Per SAE AS1300 (PS10035) and Include Long Form Certification of Calibration.

Gage Tolerances Conform to ANSI B18.3

Gage Tolerances Conform to ANSI B18.3

Hexagon (Hex) Go/NoGo Gages

Hexagon Broach Gages can be used with Polygon’s standard ASME broaches to make sure that the size of the hexagon hole has been machined properly. Unlike rotary broaches, hex broach Gages have no taper. Our Hexagon Gages are held to tight tolerances and can be made to custom shapes and sizes. We also offer external hexagon go / nogo gages.

Polygon’s hex broach Gages are made as GO and NOGO pairs. Each gage is designed to be held by hand and inserted into the hexagon hole. If the NOGO Gage fits, then the hole is too large and the part fails inspection. If the GO Gage fits, then the hole is the right size and the part will pass inspection. If the hole was too small the GO Gage would not have fit inside.

Hex Gages can also help to determine if there is too much twist in the form, a common troubleshooting feature of holes manufactured using the rotary broaching process. Our Hexagon Broach Gages are made of durable hardened M-2 tool steel. All Gages come with handles featuring green caps on the GO Gage side and red caps on the NOGO side.

Square Go/NoGo Gages

Square Broach gages (or gauges) can be used to make sure that the size of the square hole has been machined properly. Unlike rotary broaches, square broach gages have no taper. Our square gages are held to tight tolerances and can be made to custom shapes and sizes.

Polygon’s square broach gages are made as GO and NOGO pairs. Each gauge is designed to be held by hand and inserted into the square hole. If the NOGO gage fits, then the hole is too large and the part fails inspection. If the GO gage fits, then the hole is the right size and the part will pass inspection. If the hole was too small the GO gage would not have fit inside.

Square Gages can also help to determine if there is too much twist in the form, a common troubleshooting feature of holes manufactured using the rotary broaching process. Our Square Broach gages are made of durable hardened M-2 tool steel. All gages come with handles featuring green caps on the GO gage side and red caps on the NOGO side. Gage Tolerances are +0/-.0002.

Hexalobular Go/NoGo Gages

Hexalobular Broach gages can be used to make sure that the size of the 6-lobed (hexalobular) hole has been machined properly. Unlike rotary broaches, hexalobular broach gages have no taper. Our gages are held to tight tolerances and can be made to custom shapes and sizes. We also offer internal and external hexalobular Go / NoGo Gages.

Polygon’s broach gages are made as GO and NOGO pairs. Each gage is designed to be held by hand and inserted into the hexalobular (6-lobed) hole. If the NOGO gage fits, then the hole is too large and the part fails inspection. If the GO gage fits, then the hole is the right size and the part will pass inspection. If the hole was too small the GO gage would not have fit inside.

Hexalobular Gages can also help to determine if there is too much twist in the form, a common troubleshooting feature of holes manufactured using the rotary broaching process. Our Hexalobular Broach gages are made of durable hardened M-2 tool steel. All gages come with handles featuring green caps on the GO gage side and red caps on the NOGO side.

Major and Minor Diameters Per ISO 10664 and Include Long Form Certification of Calibration.

Rosan AS1300 (PS10035) Go/NoGo Gages

Polygon Solutions offer a wide range of Rosan Gages to check serrations per SAE Standard AS1300 Ports (PS10035).

 All Dimensions Per SAE AS1300 (PS10035) and Include Long Form Certification of Calibration.

Gage Tolerances Conform to ANSI B18.3

Gage Tolerances Conform to ANSI B18.3